•  Import Race Head - 30mm intake valve, 23.5mm exhaust valve, 30mm intake port, 25mm exhaust port (valves installed).

This basic kit is to upgrade your current cylinder head to our new Import Race Head. The Import Race Head takes the power gains on these engines to yet another level! This new head is like taking a Lifan 27/23mm head to a performance/machine shop that specializes in re-working heads and having them install higher quality/larger valves, heavy duty valve springs, and doing a port job to increase flow.  While this head is more expensive than a new Lifan head, any reputable shop would charge considerably more to make the Lifan head comparable in performance.  The valve sizes are 30/23.5mm with port sizes of 30/25mm.  The exhaust valve is stainless (21-4N material) and unlike the Lifan head, you wont have to worry about changing your valve springs with our performance cam.   This all adds up to a cylinder head that puts out a professional level of performance yet is still affordable for the privateer rider. 

Important Note: This head is for the Jailing/Lifan type engines - not the YX/GPX150/160s type engines (our V2 head is for those). This kit does not include a camshaft, head covers, port matched intake kit, piston kit, or a gasket kit.  The Lifan head covers fit this head as well as the cams (also Honda CRF50 type cams).  To work with your piston (unless using our 57mm big dome piston or our 160cc bore kit piston) you most likely will have to open up the reliefs on the piston to clear the valves.  Additionally, this head was only tested using our TBW0300 camshaft - if using another type, check your clearances.

Billet Clutch Assembly Kit